Best Plastic Granulator

Easy to use, high performance recycling machine

As shown in the picture, our granulator is more compact than traditional machines. We don't need to heat the plastic to melt, so our screw is very short. Through physical friction, extrusion granulation, without heating, can better protect the material properties of the particles.

We can process printed and non-printed PE, PP film, EVA film and other material films, non-woven fabrics, high-pressure HDPE plastic tubes, and other plastic sheets, and waste plastic films washed and dried from washing lines.

Granulation process, easy to operate

1. After the electric control cabinet starts, power supply to the pelletizer. The machine starts to run.

2. The feed port can feed manually or through an external conveyor belt.

3. Through the physical extrusion of the screw and frictional heat generation, the plastic becomes semi-solid.

4. The plastic is cut into pellets, mainly by the blade. If the plastic is dirty, you can add a filter.

5. The air-cooling part makes the temperature of the pellets drop rapidly.

6. Pellet outlet, where the pellets are collected.

Our Advantage

Simple to use, no need to warm up, cold start. Just schedule an employee to get the job done.

Higher particle quality, granules can directly add to the production line, the addition ratio is above 30%, and the clean pe film can reach 100%

The granulation machine can recycle a variety of materials. At present, in addition to PET, other types of plastics can recycle.

Suitable industry

Blown Film Producer

Leftovers scrap plastic in the factory (such as plastic bag ears or cutouts for disposable gloves), complete film rolls, and sheets can be efficiently recycled through a simple process.

Recycled pellets of high quality, are almost like virgin material and can be put back directly into the film line. Granules adding ratio between 30% and 100%.

Manufacturer of plastic products

In the process of making finished products, a large number of scrap plastic generate. If the value of the finished products is value, these scraps can be recycled into particles by a granulator and continue to make into finished products. Such as medical EVA materials.